sunqian021094
@sunqian021094
Reportar usuaria inapropiada
¿Qué es inapropiado de la usuaria?
Reportar usuaria inapropiada
¿Qué es inapropiado de la usuaria?
Feed Pellet Machine SZLH series Poultry Feed Production Mill is the main machine of making poultry pellet feeds. It can use to make various roughage and refined feed pellets in livestock farm and feed mill, and also can be used for the chemical industry, fertilizer industry, and sugar industry. Advantages After many times of practice, the pressure roller layout of poultry feed production mill is reasonable, the pressing area is increased as much as possible, and the production efficiency is improved. The machine adopts the top wire to control the gap between the grinding disc and the pressing wheel to ensure the pressing effect. It is equipped with a variety of hole-shaped abrasives, which can meet the actual needs of animals in different growth periods. It has a simple structure and is suitable for a wide range of materials. The feed pellets produced by it have high hardness, smooth surface and mature surface, which can not only kill various parasite eggs and other pathogenic microorganisms, but also have a light fragrance. Poultry Feed Production Mill sometimes have symptoms of no discharge or difficulty in discharging and low output, which makes many inexperienced users wonder how to deal with these situations. Generally speaking, there are two major aspects that affect the output problem or output. One is that the machine itself is not well adjusted, and the other is that the raw materials for the pellets are not properly matched. The aspect of the machine itself is mainly present in the link of the mold and the press roller. Reasons as follow 1. If you are using a new ring die, first check whether the compression ratio of the ring die matches the processed material. If the compression ratio of the ring die is too large, the resistance of the powder through the die hole is large, the particles are too hard to press out, and the output is low. ; The compression ratio of the ring die is too small, and the particles cannot be formed after being pressed out. You must re-select the compression ratio of the ring die and check the smoothness of the inner hole of the ring die and whether the ring die is out of round. Inferior ring die is lost due to the rough inner hole of the ring die. Due to the roundness, the output resistance is large, the particles are not smooth, and the output is difficult, and the output is lower. Therefore, a high-quality ring die must be used. 2. If the ring die is used for a period of time, it is necessary to check whether the tapered hole on the inner wall of the ring die is worn and the pressure roller is worn. If the wear is severe, the ring die can be processed and repaired. The wear of the die cone hole has a great influence on the output. 3. The gap between the ring die and the pressure roller needs to be adjusted correctly. Generally, the distance between the production of livestock and poultry materials is about 0.5mm. Too small a distance will make the pressure roller rub the ring die and shorten the service life of the ring die. If the distance is too large, the pressure roller will slip , So that the output is reduced.Feed Pellet Machine website:http://www.feed-granulators.com/feed-pellet-machine/
www.feed-granulators.com/feed-...
Aún no perteneces a ningún grupo.
